How To Change Code On Electronic Door Lock. Press the “lock” keypad button at the center of the smartcode keypad. Press key 1 and then press the unlock button.
It's possible to make it practically impossible for someone to guess the code on you keyless lock because you can choose to use up to six digits for your code. Then wait for the three orange flashes and three beeps. Wake up the keypad by touching it using the palm of your hand.
Table of Contents
Press The Schlage Button On The Keypad And Then Press Key 3.
Press it when the door is open. Enter a new master code, which must contain 6 numbers. Enter a new programming code (6 digits), then wait for the schlage button to light orange three times and the lock beep three times.
To Add A New Entry Code:
This lock set up is constructed by fixing a plate of magnetic metal (usually iron) to the door, and the electromagnet to the door frame. Press * to end program If you know the current master code, then you can change it at the door lock keypad.
Repeat The Process To Add More User Codes—If You Want To.
If it is newly installed, enter the factory combination by pressing 2 and 4 at the same time, then press 3. With a screwdriver, unscrew the four screws that hold the faceplate of your lock. Homeowners that haven’t changed the original code should find it written in their installation guide or on the back side of the deadbolt.
How To Change Code On Electronic Door Lock.
Enter new master pin then # 4. You can change the lock's combination whenever you want. Dial your push button door lock default code.
Wake Up The Keypad By Touching It Using The Palm Of Your Hand.
First, remove the lock from your door following the manufacturer’s directions. There is a “program” keypad button on the door’s interior side. Then wait for the three orange flashes and three beeps.