How To Change Tub Faucet With No Access Panel. However, if you are having difficulty regulating the temperature or water flow, this is when we know to replace your cartridge. There is no access panel anywhere on the tub.
Run the faucet into a bucket and don’t let anything down the drain, if it still puts water into the adjacent area, you’ll know it’s a. I would love to just replace the whole faucet fixture with something more current, and what would work better/smoother. Step 3 follow the steps below to create an access panel if making the supply line repair requires access under the faucet and you do not have it.
Table of Contents
The Tub Area Backs Up To A Fiberglass Shower Surround, So There Is Way To.
Like a closet, or even an outside wall). Then, unscrew the faucet handles and remove them to expose the faucet stem underneath. How to replace tub faucets with no wall access turn off the water valves at the main incoming water pipe.
Anyhow, You Cant Replace The Faucet Without Access Underneath, It Is Tightened To The Tub Via A Retaining Nut Underneath Which You Cant Loosen From Above.
I would love to just replace the whole faucet fixture with something more current, and what would work better/smoother. My faucet has the metal (brass) valve stems which were sticking from corrosion. Replace a garden tub faucet with help from a longtime plumber in this free.
The First Noticeable Thing To Do Is Remove The Existing Faucet.
To change a bathtub faucet, start by turning off the water supply to the faucet and opening the faucet to drain any leftover water inside of it. Unhook water lines and lock nuts from faucet stems. He thought about putting a plate or board behind the fixture to anchor it, but the wall stud ran right down the middle of his access panel, so after deciding the fiberglass shower panel was sufficiently sturdy he fastened the fixture to it (from behind).
Install A New Cartridge Inside The Faucet Head.
Next, unscrew the faucet stem and remove it so you can take it to a hardware store to find a matching replacement. Behind the tub/shower is the hot water heater so without moving the water heater i advised customer there was no way to access the plumbing for the shower. If there's no access panel, it might be easiest to put one on the other side of the wall (out of the bathroom).
First, Turn Off The Water Supply To The Area Entirely And Remove Handle Cover Plates (If Any).
If no water is entering the tub, repair your plumbing supply line problem as you would any faucet in your home. A tub/shower faucet in a shower surround is in need of replacement. First, confirm it’s a supply leak, not a waste leak.